Tetenal colortec c 41 manual#

Not saying you should but in general the safest to have reproductable results is to do the same workflow everytime. I usually develop two films at a time for 35mm, or two times one 120 in the same session, as my tank is 0.5l, so if i do 1x120 and then the next time 2x35mm, i'm at roll 2 and 3, and while you can probably use an intermediate time, i prefer to keep it straight. ( There are tanks that can hold one, two, four or more films, it's really about the quantity of cheminals vs surface treated). Just, the more times you use it, the more times it comes in contact with air etc, it might degrade faster, but the 16 films per liter is a bit conservative amount, so you should be fine.

Tetenal colortec c 41 manual#

Manual sais 2 films for 0.5l, 4 films per 1 l per time increase. Tetenal Colortec C-41 Rapid 2 Bath Color Negative Developing Kit has been specially designed for optimal development of each type of C-41 compatible color negative film using rotary process. Colortec - the best available technology for color chemicals. If you use 24 exp films, you might have to recalculate. Tetenal Colortec C-41 2 Bath Color Film Negative Processing Kit (1L/2.5L) 55.55 The Tetenal Colortec range offers you a high level of performance, quality, safety, convenience, environmental friendliness and service. (135-36 being 35mm film with 36 exposures, just in case. TETENAL chemicals for RA-4, C-41, E-6 and B/W ensure a particularly high quality of workmanship and enable safe, user-friendly handling - they stand for an optimal combination of cost-effectiveness and compliance with ecological requirements. In the beginning it says yield(total amount of films for the entire pack) for both 135 and 120 to be the same amount of rolls, so they count the same. Once the thermometer hits 38,539 degrees C, start pouring the developer into the tank at.

35mm and 120 film are the same surface, each count for 1 film. I use the Tetenal Colortec C-41 set mix the chemicals to the.